Essential Clear and White
This product series is a water base ink developed to produce soft hand and good stretch
on knitted fabrics. A ready product to use, It is available as a clear Base and as a White.
Very good elasticity.
Good all round fastness.
PVC, phthalate, APEO, Azo and Lead Free formulations.
Meets all key international environmental standards.
Soft finish prints.
No harmful or distracting odors in the work place.
Use 100-120 t/in mesh (40-47 t/cm)
Ready for use, reduction of viscosity can be adjusted by distilled water to avoid spoilage, only mix quantity which can be consumed in 3~5days.
Avoid wet on wet printing application.
Build up ink film thickness by print, dry, print.
Blending White can be achieved by difference ration of Base and White, depend on background color.
Keep the screen in the flooded position while print stops. Or, go for screen wash during a temporary stop.
Containers must maintain air-tight seal while not in use.
During Production, heat application can be applied to speed up the process. Failure to cure ink at recommended time and temperature may result in poor wash fastness.
To meet superior wash, adding Additive CrossLinker Low Cure 3-5% by weight is necessary.
Screen must be prepared with water-resist emulsion to prevent stencil breakdown.
Any application not referred in this Product Information should be Pre-tested or consulted with Primus Technical Service Prior to Print.
100% Cotton/Poly Cotton/Blended
Durometer: 60-70 Edge: Rounded or Sharp
150℃ × 121minutes
Additive CrossLinker Low Cure 3-5% by weight.
Additive Retarder 3% Max. by weight.
Use within one year of receipt. Avoid exposing under direct sunlight. Keep drums sealed tight at all times.
Health and Safety
Available upon request (MSDS)