Aqua EV Clear & White

Aqua EV Clear & White

It is a water base ink developed to produce a very unique characteristic and break-through technology on AUTOMATIC PRINTING MACHINE. Slow drying property gives adequate dwell time to run continuously without screen clogged from the hot plate.


  • Excellent coverage and stretching
  • All round fastness durability
  • PVC, Phthalates, APEO, Azo, Formaldehyde and Lead Free formulations. Meets all key international environmental standards.
  • Suitable on manual and automatic machine.
  • No harmful or distracting odors in the work place.


 {Printing Guides }
  •  Use 100-120 t/in mesh (40-47 t/cm)
  • Ready for use, No any other additive is required. Well stirred the paste before using.
  • Avoid wet on wet printing application.
  • To create certain coverage on dark ground, increase times of coating is required.
  • For fine mesh design, Additive Retarder is required to be added by 2-3% to prolong its drying time.
 {Precautions }
  • Keep the screen in the flooded position while print stops. Or, go for screen wash during a temporary stop.
  • Containers must maintain air-tight seal while not in use.
  • During Production, heat application can be applied to speed up the process. Failure to cure ink at recommended time and temperature may result in poor wash fastness.
  • To meet superior wash, adding Additive CrossLinker Low Cure 1-3% by weight is necessary.
  •  Screen must be prepared with water-resist emulsion to prevent stencil breakdown.
  • Any application not referred in this Product Information should be Pre-tested or consulted with HR Technical Service Prior to Print.
By |2018-11-09T06:36:37+00:00October 22nd, 2018|Clear & White Rubber Series|0 Comments

About the Author:

Leave A Comment

download almost uapkmod here | All of new Android racing game you can check here